How to Check Battery for Linde K10 K13

This instruction will show you guide on how to check battery for Linde K10 K13.

 

Preparation:

Linde Pathfinder Diagnostic 2019 2017 Software Free Download

Linde Pathfinder V3.6.2.11 LMH+KMS Diagnostic Software Installation Service

 

Procedures:

Electrolyte (battery acid) is toxic as well as caustic. When handling battery acid,always  adhere  to  the  prescribed  safety measures Especially  with  freshly  charged  batteries,observe explosion dangers in gasing area.

The  battery,  being  the  energy  supply,  has to be treated with care! Therefore observe:

•  Keep the battery dry and clean.

•  Charge regularly and check acid condition.

•  Check cable connections and battery plug for proper condition.

•  To protect against corrosion, apply acid free pole grease on the battery poles.

In addition, for batteries with liquid electrolyte:

•  Check the electrolyte level at regular intervals

•  Suction away spilt electrolyte using as iphon from the battery tray.

Note:

Gel batteries are subject to special charging/maintenance and treatment regulations.Always  obey the instructions issued by the relevant manufacturer.Caution Plug battery plug in or out  only when key switch is switched off. Is the battery plug pulled out when a consumer is still active, it is possible for all the contacts to burn.