Accessing Home Network Router Setup Or Console
Use the
network router management console and enhance functions of your router
Many users of home broadband routers think
about how to enhance the overall settings of their router. They can access the
network router management console and begin their step to make any kind of
essential changes directly. Many brands of home broadband network routers have
the same IP address 192.168.0.1. For example, the following brands of routers
have this IP address by default.
·
Netgear
·
D-Link
·
TP-link
As a private IPv4 network address, 192.168.0.1
is a known IP address and used by many users worldwide. You can assign this IP
address to any resource in your network that is associated with the Internet.
On the other hand, more than one resource with the same IP address may lead to
IP address confliction and its associated problems.
How to
access the router login page
If you are a user of any brand of a home
broadband network router with the IP address 192.168.0.1, then you can keep
focusing on the following details on the subject of how you can login to your
router directly.
You have to open the browser and type in this
address in the address bar. Once you have typed http:// 192.168.0.1 in the
address bar of your browser and click the Enter button, you will be redirected
to the network router administration console.
The router with the IP adress192.168.0.1
router login page requires username and password to login to it properly. You
may forget these login details and ensured that you do not change the default
username and password of your router.
The default username and password for the following brands of routers
assist you to identify the best suitable router login details directly.
·
Username and password for the D-Link
router by default are admin and blank.
·
The default username and password for
the Netgear router are admin and 1234.
Be aware of
why you cannot access to 192.168.0.1
Some users of routers are unable to access the
IP address 192.168.0.1 router login page directly. This is because they have
failed to identify and ensure whether IP address of their computer’s gateway is
192.168.0.1. They have to open the
command prompt and type in the ipconfig/all. They can also ping 192.168.0.1 in
this CMD.
If they make sure that their gateway address
is 192.168.0.1 and cannot access to the router login display, they have to
check whether there is any firewall or unspecified network port or not.
As the most common DOS command for detecting
the network connection and its level of speed, the ping command is known among
those who use computer networks nowadays.
You can click the Run application and enter the CMD. If you hit the OK
button, then you have to ping 192.168.0.1.
You can understand that the disconnected
network, poor packages or a disconnected router and the computer get in the way
when the result returns timed out. A
router with any other IP address may give you this result. Do not fail to
ensure that your router is connected and active while accessing to the IP
address 192.168.0.1.
Comments