The R200 Programmer Compare with the R250 Programmer Tool

If you have brought the  Audi Dashboard Programmer  , you may know the R200 programmer and the R250 programmer , but you should know the difference between these two car diagnostic tools,First let see an article about the two tools and then , let me give your the short description about these two tools:

R200 In Circuit Programmer Description:
Our interface looks like a small box that needs to be connected to a PC running Win98/Me/XP. You only need to solder few wires to the board, read back the actual value and then write the new value with no limitations at all. Just one thing: remember that this interface works only with boards made by Siemens VDO featuring two Fujitsu microcontrollers marked MB91F366 and MB91F368 with serial EEPROM named 93c86 or 93lc86.

R200 In Circuit Programmer Specifications:
R200/R200s/R200s – In Circuit Programmer for Audi A3 2005/2006 And A8 2005/2008

VAG R250 VW Audi Dashboard Programmer Description:
R250 VW Audi Dashboard Programmer’s main function:You can use R250 to program Siemens/VDO new cryptography system.R250 looks like a small box that needs to be connected to a PC running Win98/Me/XP. You only need to solder few wires to the board, read back the actual value and then write the new value with no limitations at all. Just one thing: remember that this interface works only with boards made by Siemens VDO featuring a Micronas microcontroller CDC3217 or CDC3297 and 24c32 or 2432 memory.

VAG R250 VW Audi Dashboard Programmer Specifications:
R250 VW Audi Dashboard Programmer
You can use R250 to program Siemens/VDO new cryptography system
This product looks like a small box that needs to be connected to a PC running Win98/Me/XP.
You only need to solder few wires to the board, read back the actual value and then write the new value with no limitations at all.
Just one thing: remember that this interface works only with boards made by Siemens VDO featuring a Micronas microcontroller CDC3217 or CDC3297 and 24c32 or 2432 eeprom memory.
Notice:
This interface can program also the new Audi A3/TT 2007 made after June 2006 featuring Micronas CDC3217 and 2432 memory.

VAG R250 VW Audi Dashboard Programmer Package Including:
1pc x R250 main unit
1pc x RS232 cable
1pc x Connector c

We can see that this two tools are different , If we can't distinguish these two tools , we maybe some wrong to use them.