Is Your Blink Camera Blinking Red? Fix-It Now!

Looking for an expert who can fix the Blink Camera Blinking Red issue? You can end your search with this article. In the guide, we are going to discuss why your security camera is blinking red light color.

If you have recently noticed that your Blink Camera Blinking Red light, check your internet connection first. A bad wifi configuration could be responsible for Blink Camera Not Detecting Motion.

Let’s figure it out, why is your security camera blinking red and how can you fix it. If you need any help, get in touch with our experts now.

Why Is My Blink Camera Blinking Red?

In most of the cases, the Blink Camera Not Working Red Light issue detects there is a fault in our device. It could be loose or faulty batteries and a bad wifi connection. Here are some reasons why Blink Camera Blinking Red light:

1. Faulty Batteries

Damaged or discharged batteries could be responsible for why your Blink Camera Not Detecting Motion. So, check and replace the batteries with the new ones.

2. Security Camera Setup

If you are doing the Blink Camera Setup, you will see the red LED light which will disappear after a while. So, don’t worry about it.

3. Network Connection Issues

Make sure your internet connection is perfectly working. A weak network connection could be responsible for why the Blink Camera Motion Sensor Not Working. So, check your wifi connection first. If found anything wrong, contact your network services providers.

4. Detected Motion

The inbuilt motion detector in your Blink security camera will cause the LED light to blink once while it will record any motion. In this case, there is nothing to worry about.

5. Hardware Issue

A possible hardware issue in the Blink security camera could be responsible for the blink camera flashing red light.

Moving ahead, let’s have a look at the below-given troubleshooting methods.

How To Fix Blink Camera Blinking Red Light Issue?

Before applying the troubleshooting solutions, reboot your security camera first. Sometimes, a quick rebooting helps to fix the issue. Hence, turn off the device, wait for a minute or two and then restart the device. Check if the issue is resolved or still your Blink Camera Blinking Red light.

1. Replace the Blink Camera Batteries

If you have power recycled the security camera but it is still blinking red then replace the batteries. Drained batteries could be one of the main reasons behind the Blink Sync Module Red Light issue. So, replace them with new batteries and see if the issue gets fixed or not.

Note: Make sure batteries are aligned in the right position.

2. Move Blink Camera Close to the Router

You may have installed the router far from the sync module of the Blink camera. This is the reason why you are facing the red light issue in your Blink camera. It is an indication of a lost connection with your sync module.

3. Reconnect the Blink Camera To Wifi

Now, you probably know why is Blink Camera Blinking Red light. So, try to fix the issue by reconnecting the camera with the wifi.

Here are the steps to reconnect the camera:

• Open the Blink app and go to the “Network & Connectivity tab”.

• With the help of the “search” button, scan the nearby networks.

• Once the network is located, tap it.

• Enter the password and confirm it.

Last Words

At the end of this article, it can be said that a bad network connection could be responsible for the Blink Camera Blinking Red light. For more, get in touch with our experts now. They are 24*7 available to help you.