How to Fix HP Officejet 6830 printer printhead issue?

HP printer has many features that make it different from other printing devices. If you are suffering from any issue, you don’t need to go anywhere. Sometimes the users of HP printer face printhead issues. If you are one of those who are suffering from HP Officejet 6830 printer printhead problems. Then you don’t need to worry. Here in this article, we will discuss the complete process to fix this type of issue. If the given solutions are not compatible to fix the printhead problem then you don’t need to take tension. The professionals are always here to help. They will give you one of the best solutions without any delay. To get in touch with the professionals call on HP printer tech support phone number +(1)-888-846-5560 either send an email: support@printernumbersupport.com

Solutions to solve HP Officejet 6830 printer printhead problem

If you want to remove this type of issue, then you can apply the best solutions that will help to fix this issue in a few little moments. To resolve this error, follow the given solutions.

• At first, open the cover as you would to change ink cartridges.

• Disconnect the power.

• Replace all the screws of the inner top cover. You will need either a start screwdriver of the right size or a flathead screwdriver that exactly fits the screws.

• Gently lift off the inner top cover of the printing machine and then put it out the way; you do not need to disconnect the cables; just place it on the side so that you can access the printing device’s internals.

• Make a note of the plastic location tape’s orientation, as per your need to put this back exactly the way it came, Note which end is left or right, and which side is top or bottom.

• Replace the location tape.

• Replace the screws from the print heads base. 

• You will be able to lift al the assembly along with printhead and its bar, up and tilt it upside down: don’t disconnect any cable.

• Clean the bottom of the printhead with a clean wipe. My printhead had excessive ink.

• Put everything back, the invert of the above instructions. 

• Plug the power back in and then switch it on.

• On the printing device’s control panel, swipe left and go to setup/ printer maintenance and choose a clean printhead.

• Clean the print head.