How to Fix Brother Printer Error Code 76?

The Brother printer has many features that make it useful for each person. To get the best printing services, you can purchase it from its official site. But sometimes the users of Brother printing device encounter Brother printer error 76. If you are facing this type of error, then you don’t need to worry. There are several reasons behind this error. Due to this error, you can’t complete your printing job. If you want to remove this error and you don’t know how to fix Brother printer error code 76. So you don’t need to take tension. You can read this article where we discuss the complete procedure to vanish this error with ease. To remove this error you can apply the below mentioned. If you need the help of experts so you can always contact them through Brother printer customer support phone number USA +(1)-888-846-5560. The professionals are available around the clock for your help. Therefore, you can contact them at any time.

Causes Behind Brother Printer Error code 76

There are many causes behind this error. If you want to know the reasons of this error then look at here:

• The error code arises due to improper shut down from the system.

• If the corrupted entries inside the home windows process files.

• If spyware, malware or any other virus attack on your system.

• Due to an incomplete installation of the printing machine driver or software.

• Deletion of programs inappropriately.

• Sudden power outage.

• Imperfect un-installation of programs.

• Any ripped piece of paper or foreign object stuck in the printing device. 

Solutions to Fix Brother Printer Error code 76

For your help, we brought some solutions, which help you to fix your problem as soon as possible. To fix this problem you can follow the below-mentioned steps one by one in sequence. Keep in mind if you skip any step then your problem can’t be solved.

Reset Brother Printer Manually

To perform this solution you need to follow the given steps.

Step 1. 

• Click and hold the ‘ menu’ key of the printing device.

• While holding down the key, switch on the printer.

• Then, wait until the display reads maintenance. Once this happens, press the (9,9) key.

• Your printing machine will automatically reset.

Step 2. 

• Click the menu key *, 2, 8, 6, 4 accurately.

• If it is done in the proper way then the PC will show maintenance and the light on the display will blink.

• Now, click button 9 two times. It will let the machine to exit out of the maintenance mode and then start the normal warm-up procedure.

• Most of the time, this method fixes the problem. But if it fails then you need to remove the fusing assembly immediately. 

Check for brother printer paper jam or paper scrap.

• Disconnect the brother printing machine MFCj430w then open the scanner cover followed by looking inside the device.

• Then, look for a piece of trash or paper jam inside the printing machine and be sure that the paper is not blocking the printer head.

• Turn the printer to the left or right to check for a piece of trash, if the printer head is already on the left side, turn it to the middle.

• Now have a look for foreign objects inside there and then close the cover of the scanner and put the power switch back on the device. Clear the encoder strip, if the error continues.

• If the printer head is on the right side, place the power cord back on the printing machine. When the LCD shows that the cover is open, hit and press the exit button for a few seconds. As the printer head turn back to the middle, disconnect the power cable and remove the foreign objects stuck inside the printing machine.

• Close the cover of the scanner and put back the power cables back to the wall outlet.

• Clean the encoder strip if the flaw still.