How To Choose The Best Industrial Hose That Suits Your Needs
Hydraulic hoses are used for various purposes across many different industries like agriculture, manufacturing, construction, machine, mining, oil and gas. Using the right type of hose is therefore much mandatory if you are to ensure that your hydraulic systems works in the right way without any error. So, if you are going to shop for a hose, the following five buying tips and guidelines will definitely come in handy in helping you find the appropriate hose for your hydraulic system.
The Size of the Hose
The first thing that you should do upon buying a new hydraulic hose is to measure its internal diameter using a well calibrated caliper. Determining the hose's internal diameter is very crucial in avoiding unwanted friction. Remember that friction occurs when the fluid flowing inside the hose rubs against its inner walls. It is this high friction that increases the temperature of the fluid, and as such, leads to reduced flow rate. In case you are therefore replacing an old hose, the new one must have measurements which are similar to those of the existing hose so as to avoid friction.
Temperature of the Flowing Fluid
It is no secret that fluid temperature significantly affects the longevity/life span of your industrial hose. If you let a fluid that has a higher temperature than the hose specification flow through the hose, then you automatically drop down the hose's life span by up to 80 percent. If you really don't want to waste time and money replacing the hose day in day out then it is imperative that you get to know the minimum and maximum temperature of that fluid that will be flowing inside the hose. Simply put, going in for a hose that adequately matches the maximum fluid temperature will help extend the life span of your hose. You should as well bear in mind that fluid concentration, contamination level, and high temperature equally affects your hose's chemical compatibility level. As a precautionary measure, it is recommended that you should consult widely with your provider so that you only purchase a compatible hose that will effectively meet the needs of your hydraulic system.
Working Pressure
Different kinds of hoses have distinct pressure capabilities. So, do not even try to use a hose that doesn't suit your machine's working pressure as you will have to replace it immediately. The most pragmatic thing to do is to determine the pressure capability of your machine beforehand so that you only buy that hose with a higher pressure capacity than your hydraulic machine.
Sheathing
See to it that you only choose those hoses with sheathing or wire if the hose will be used in an area that might cause damage to it. On the same note, also check if the o-rings and couplings are compatible with your old hoses. Lest you forget, if incompatible connectors and mating threads are used, then there is a high probability of leakages in the hydraulic system.
Availability
The availability of the chosen type of hose is another critical aspect that you should never outlook. Some unique hoses are always limited and take a couple of days for processing and delivery. To cut down on the time lost due to replacement parts delivery delays, it's only you stock spares for unique hoses.
Following the above mentioned tips in buying a hose is a very critical cornerstone in ensuring that you buy the hydraulic hose that will help him/her achieve optimal performance of his/her hydraulic system.
Following the above mentioned tips in buying a hose is a very critical cornerstone in ensuring that you buy the hydraulic hose that will help him/her achieve optimal performance of his/her hydraulic system.
2 people like it
Comments