Configuring Telus Hub!

Remove the Telus Hub and its accessories from the box.

Plug the power adapter into the Telus Hub and then into a power outlet.

Wait for the hub to power up. The lights on the hub should start blinking.

If you're using a wired connection, connect an Ethernet cable from the WAN port on the Telus Hub to your modem or directly to your internet service outlet.

For a wired connection, use an Ethernet cable to connect your computer to one of the LAN ports on the Telus Hub.

For a wireless connection, find the default Wi-Fi network name (SSID) and password printed on the label on the back or bottom of the Telus Hub. Connect to this Wi-Fi network using your computer or mobile device.

Open a web browser and enter the default IP address for the Telus Hub in the address bar. The default IP address is usually 192.168.1.1.

You will be prompted to log in. Enter the default username and password, also found on the label on the Telus Hub. If there is no username/password on the label, try the defaults (often "admin" for both fields).

For security reasons, change the default admin password. Navigate to the appropriate settings section in the web interface to do this.

Go to the Wi-Fi settings section. Here you can:

Change the Wi-Fi network name (SSID) and password.

Set up separate networks for 2.4 GHz and 5 GHz frequencies if your hub supports it.

Enable or disable guest networks.

Network Settings: Configure DHCP, IP addresses, and subnet masks.

Port Forwarding: If you need to forward ports for gaming or other services, set up port forwarding rules.

Parental Controls: Set up rules to restrict internet access for certain devices or at certain times.

Once you've made all your desired changes, save and apply the settings. The Telus Hub may reboot to apply these changes.

Make sure your devices can connect to the internet through the Telus Hub. Check both wired and wireless connections.

Walk around your home to ensure you have good Wi-Fi coverage in all areas where you need it. You may need to adjust the placement of the Telus Hub or add Wi-Fi extenders if necessary.

No Internet Connection:

Check all cable connections.

Restart the modem and the Telus Hub.

Ensure that the modem is properly provisioned by your ISP.

Weak Wi-Fi Signal:

Reposition the Telus Hub to a more central location.

Avoid placing the hub near large metal objects or electronic devices that might interfere with the signal.

Forgotten Admin Password:

Perform a factory reset by pressing and holding the reset button (usually a small, recessed button) on the Telus Hub for about 10 seconds. This will reset all settings to factory defaults, including the admin password.