A Handy Guide to Help You Understand Colorbond Fence Cleaning

Amongst all kinds of fencing materials available in the markets, colorbond fencing has managed to retain its customer base. This is mainly due to durability, low maintenance, and attractive appearance. Colorbond fencing is the most resilient material available, but it will also require some maintenance, inspection and occasional repair in the outdoor environment. Several steps are taken in this regard, and we go through some standard maintenance and repair steps for colorbond fencing in this article.

Damage Assessment

The first step in the repairing process of colorbond fencing and colorbond fence extension is the assessment of the damages. This includes inspecting the entire structure and searching for signs of rust, loose screws, damaged panels, vents, posts, etc. All the underlying problems should be noted down and marked, as this will help you plan an appropriate repair strategy.

Rust Treatment

Constant exposure to air and other weather conditions generates rusting, and this must be handled immediately before any colorbond fencing or colorbond gates are repaired. This issue can be addressed easily with a wired brush that can remove rust from the affected areas. This scrubbing is followed by applying a rust converter to prevent further rusting and corrosion. This rust converter is used and left for some time, and once it dries, the treated area can be painted with the matching colorbond paint.

Fitting The Loose Screws

Loose screws are standard in colorbond fencing and colorbond fence extensions, and this issue should be addressed immediately. You can tighten all the screws and ensure that the affected section is fitted back into its original position. If too much damage is there, you can replace them with new ones, and as a result, you will get secure, fastened and perfectly fitted colorbond fencing.

Repairing The Damaged Panels

In some cases, some panels of colorbond fence extensions get damaged, and if the damage is much more than assumed, replacement is the only step. This replacement can be done by removing the screws that hold the damaged panels and removing them. This is followed by installing the new boards and securing them back with new screws. While doing this, you must ensure that the new panel aligns perfectly with the existing colorbond fencing.

Straightening The Bent Posts

Bent posts compromise the fencing strength, durability and looks of your colorbond fencing. They must be straightened, and for this, a lever or jack is used to apply gentle pressure towards the opposite direction of the bending. Too much force is not needed, as it might lead to further damage. Once the post appears completely straight, you can reinforce it with concrete to ensure that it remains fixed in its place.

Cleaning And Maintenance Of Colorbond Fencing

Your dream of extending your colorbond fencing life can become a reality with regular cleaning and maintenance. This can be done using a mixture of clean, warm water and a mild detergent used for surface cleaning. Vendors of colorbond fence extensions advocate not using harsh chemicals or abrasives that can damage the finish, shine or looks of your colorbond fencing. Apart from this, regular inspection is also recommended to trace the signs of wear and tear. Any minor issues detected during this inspection should be addressed before they convert into major, time-consuming and money-consuming issues.

Is Diy Possible In Colorbond Fencing Cleaning?

Colorbond fence cleaning is possible through DIY, provided that you have the right tools and knowledge for cleaning and repair. Using the guidance available on the Internet and particularly YouTube will help you repair your colorbond fencing quickly.

How To Prevent Colorbond Fence Rusting?

Rusting is mandatory in colorbond fencing, and you can do nothing to stop it from emerging. Regularly inspecting your fence for signs of rusting can eliminate the issues that cause rusting. You can also treat the affected areas using a rust converter and colorbond paint.

Is Colorbond Fencing Suitable For All Weather Conditions?

Colorbond fencing is tested in all kinds of weather conditions prevailing in Australia, including bushfire-prone areas and coastal winds. The results assure that colorbond fencing can withstand any harsh weather, and this makes it ideal for any climate in your city.