Advantages of Induction Aluminum Melting Furnace

The melting furnace in the aluminum alloy is a new type of high -efficiency energy -saving aluminum furnace developed according to the aluminum fusion process. It is mainly used for the melting and insulation of aluminum ingots. It can well meet the aluminum melting process. The furnace is composed of a melting furnace, crucible, heating component, furnace cover lifting mechanism, and electrical automatic temperature control system.

A new type of high-efficiency energy-saving furnace was developed according to the aluminum fusion process. It can meet the requirements of the aluminum melting process: strict alloy components, non -continuous production, and large single furnace capacity. , Reduce burning, improve product quality, reduce labor intensity, improve labor conditions, and improve production efficiency, suitable for intermittent operations, combined alloys, and melting.

The circular bottom furnace and reasonable burner configuration, the furnace gas cycle is strong, the furnace temperature is uniform, and there is no local overheating and burning phenomenon improves the quality of the product, and extends the service life of the stove.

Using vertical furnaces: Furnace materials fully absorb the waste heat in the vertical furnace, reduce the smoke exhaust temperature, and greatly improve thermal efficiency. When the furnace enters the bottom furnace, it has preheated to the near-melting state, ensuring a high melting rate and very low melting rate, and very low energy consumption.

The air preheater and furnace shell mezzanine air duct: The air heater absorbs the waste heat of the flue gas. The preheated air enters the furnace shell mezzanine air duct to further heat up, which is relatively increased to increase the ambient temperature, and reduce the heat dissipation of the furnace shell, and reduce the heat dissipation. After the air is preheated, the combustion efficiency, combustion strength, flame temperature, and speed, strengthening furnace air circulation and heating speed.

The furnace door structure is reasonably sealed, and there is no need to add the furnace door at the door of the furnace; the furnace door is tight, the opening time is small, the heat dissipation loss in the furnace is small, the dead corners are not refined, the operation is convenient, and the operating environment is good.

Furniture: Easy to add material, low labor intensity, small fluctuations in furnace temperature, long furnace age, and not occupying the melting time.

Equipment with a capacity below 3T can be cooled by air cooling without water cooling equipment.

During the smelting process, the aluminum liquid has no flow, no tumbling, reduces oxidation, and the composition remains unchanged.

The smelting speed is fast, the burning rate is low, and the recovery rate of scrap aluminum is 92%.

Discharge flexibly. It can be discharged at the bottom of the furnace body. Or, you can turn the furnace body to discharge.