Why is my Lexmark printer not connecting to WIFI?

Lexmark Printers are excellent for black and white printing and cost-efficient because of the low cost per print. And it can yield many pages before the toner cartridge needs to be replaced. Here’s a guide to help you solve Lexmark printer offline error and all kinds of printer problems.

Lexmark Printer Troubleshooting Guide:

Lexmark Printers users face common printer issues. And one such standard error is that Lexmark printer says offline. If the printer is not printing, this can happen for different reasons. In such a situation, you will receive an error message “Document Failed to Print.” To troubleshoot this issue, follow the given steps.

1.      Make sure that your computer and printer are connected to the same network

2.      Then restart your printer

3.      After that, unplug the printer and check if any paper is stuck and if the toner is installed correctly.

4.      You can also try uninstalling and reinstalling the printer on your computer when Lexmark printer says offline. These steps will solve any problem related to a Lexmark printer.

How do you get a Lexmark printer back online on a Mac?

If your Lexmark printer goes offline, it stops all your work, and you’re stuck. You must be calm and patient in such situations and try the troubleshooting methods mentioned here. These methods will solve your problem instantly.

·         Firstly turn the Mac off and back on. A simple restart cures any problem.

·         Then make sure that the printer is connected to the network because if it is not, it won’t respond.

·         Also, ensure the printer is set as the default printer

·         And lastly, delete any available print jobs because a print job could be stuck, causing a backlog.

How to fix Lexmark printer offline issues on Windows?

Sometimes you are trying to print an important document, and your printer says it’s offline because of Lexmark mc3426 driver. It isn’t enjoyable. But you can quickly solve that. The printer shows an offline message when it is not connected correctly. In such a situation, restart your printer and wait for two minutes. Then check your printer connection. Finally, run a test print. And hopefully, the printer will start printing again.

How do you resolve Lexmark Printer Setup Problems?

·         First of all, go to the official website and download the printer driver

·         You can always refer to the Lexmark Printer manual.

·         Then open the ink cartridge door.

·         After that, remove the tape inside the printer and close the ink cartridge door.

·         Then connect the power adapter to an electrical outlet and turn the printer on.

·         Then select your desired language and country.

·         After that, adjust the printer control panel and set the date and time.

·         Then load a plain sheet of A4-sized paper into the paper tray.

·         Remove the protective cap from the carriage and press down on the ink cartridge.

How to troubleshoot Lexmark Printer Ink Cartridge Problem?

If you cannot remove the ink cartridge, it is advisable not to apply force and remove it. Follow the appropriate steps given below.

·         Firstly, switch on the printer.

·         Then open the ink cartridge access door.

·         After that, wait for the carriage to stop automatically and press the tab.

·         Then set up the ink cartridge and remove it from the slot.

·         Then insert the new cartridge and close the ink cartridge door of the printer.

These are effective ways to fix the various issues with the Lexmark Printer like Printer status offline. So follow them as mentioned here and solve your problem without much trouble.