What are LED panel lights?

LED panel lights are a type of lighting fixtures designed to replace the existing fluorescent conventional ceiling lights and these LEDs are one of best options for indoor lighting purpose and are being liked by the people across the globe. All the home-owners can easily replace the existing fluorescent ceiling lights with energy-saving LED panels in a fast and safest way; by making the replacement, you can have a major amount of savings both in terms of electricity bills and in terms of energy as well. Moreover, there will be reduced maintenance and electricity costs as well as a brighter environment.

How can I replace existing fluorescent panels with LED panel lights?

How to install recessed mounting

Installing LEDMYPLace LED panel lights is very easy, just adhere to the beneath steps:

• First of all, switch the power off so that you can begin with the process in the safest way.

• Once the power switched have being turned odd, lift the recessed modular fitting into the ceiling.

• Now disconnect the fitting from the mains and remove it so that you can replace it with the brighter forms of lights, LED panel lights.

• Now wire the LED panel driver to the mains so that connections can be made in a secure way.

• Now the place the new LED panel into the recessed ceiling and connect the connector with it.

• Now adjust the LED panels at its place and get ready to witness a tremendous change in the overall illumination that is sufficient enough to lighten the indoor commercial and residential places.

It’s just that simple, by following these steps, you can easily give a modern look to your homes and offices as well. 

Retrofitting

Retrofitting basically means the addition of new technology or features to older systems that can improve the overall efficiency and are fully equipped with giving you energy efficiency benefits as well. By retrofitting LED panel lights in place of the classic halogen, you can enjoy better savings in addition to better lighting results as well. 

How to install suspended mounting

Suspended mounting can give your homes and offices modern and classy looks, with LEDMYplace’ surface mounting kit, you can do the installation easily. 

You can install suspender LED panels in just a few steps:

• The surface mounts come in four parts which you build as a frame, leaving a side of the frame open to slide the LED panel in.

• Make sure that the power supply is off so that the wiring process can be done safely, 

• Now plug the panel into the driver.

• You can use a screw to fix the two hanging cables to the roof, you just have to keep in mind that the cables are adjusted so that the LED panels can be fixed easily.

It's done and it is quite simple process and surface mounts are a great choice if you don’t have a recessed ceiling.

If you have any queries or issues, our Frequently Asked Questions will give you the answer.

1. Can I use LED panel lights with a dimmer switch?

Answer- Absolutely Yes, all the LED panels designed at LEDMYplace are dimmable lights and are compatible with most of the dimmers that are available in the market. 

2. Why LED panels are better than CFL panels?

Answer- Compact Fluorescent Lamps (CFLs) were the first generation of bulbs but they take much time to warm up and reaching to their full potential means so much waiting time. But the LED bulbs embedded inside these LED panel lights reach their full light output instantly and are more energy-efficient than CFL bulbs. 

3. Are LED panel lights safe?

YES, these lights have received all the approvals that ensure their safety, in fact, this lighst are ETL certified and IP40 rated product, perfect for all indoor places. 

4. Can I use them day and night inside my offices?

Answer- The LED panel light’s aluminum fixture meets all the expectations and the fixture is not only protected against harmful corrosion but also work as a heat sink that helps in keeping the tubes cooler despite being used for longer period of time as well.

5. Do I need to replace my light fittings to use LED panel lights?

Answer- No the LED panels are designed to retrofit existing fittings, just check the dimensions of the new LED panels and make sure that the new product is for the correct size for the existing fittings. LEDMyplace panel lights are available in various shapes and sizes, so you can easily pick the best ones.

Installing LEDMYPlace’ LED panel lights isn’t hard but in case you are buying these lights for the first time, you need to follow all the safest norms. If you need any kind of assistance, you can simply get professional help from us and can start using these lights to lighten indoor places at the most rock bottom rates.