Three Ways to Optimize Your Home Wireless Network

Nowadays, the home wireless network has grown significantly, which has brought a lot of convenience to people because of its fast and reliable features. But the world is not always perfect. When the signal keeps dropping or the speed is so slow, people might get frustrated. As a result, there has been a trend that people are more and more focusing on the speed of the network. This paper will give you some advice to optimize your home wireless network.

The easiest and most important way to optimize the home wireless network is to organize your connected devices in a structured media enclosure serve as the central hub. This enclosure can be the best housing for all of your devices, including routers, switches and modems, which can save you valuable space so that eliminate clutter and have easy access to all of your connected devices, all while maintaining a clean aesthetic. What is more, when you put your enclosure in the center of your home, your network connection coverage can be up to maximum. Remember that keep your access points off the floor, out of closets and cabinets, and away from walls and large metal objects, like file cabinets.

Check your network devices to make sure if they can still support the speed. You know, the technology is always advancing, so maybe it’s time to replace your old devices. For example, you can check the network adapter in your wireless devices such as computers or phones, to see if they use the 802.11n (wireless-N) protocol. If “Yes”, you can get the fastest speeds. But if your devices use the 802.11g protocol, it can be limited to wireless-G speeds (maximum 54 Mbps).

Also, you should know that the fewer devices on a wireless network, the faster the network is likely to run. So you can connect some of your equipment by a hardwired connection such as CAT cabling.

In order to adapt to the further advanced wireless protocols, one of the ways to increase the speed is using wider wireless channels. In general, if you want to achieve maximum speed, the routers should use a 40Mhz channel width. But the fact is that most routers come with 20MHz as the default width, which is in an attempt to avoid interference. This situation may be a potential negative affect on some users. If you start to notice issues, switch back to a 20Mhz operation. Also note that this isn’t really for increasing how fast you browse the internet. This change is more likely to be evident when streaming/transferring files between devices on your network. For this case, you can just find the “Channel Width” setting in your router’s setting and change it to “Auto 20/40MHz”.

After reading the above steps, it would be of some help to build your home wireless network. If you do check your devices or want to do some hardwired connections, you could visit FS.COM for help. It can offer the CAT cables and other telecommunication equipment with good quality and reasonable price, and you can pick up what you want. For more information, visit FS.COM.

Originally published at http://www.chinacablesbuy.com/three-ways-to-optimize-your-home-wireless-network.html