The Most Typical Causes Of Tyre Grip Loss

The tyres are a crucial part of every vehicle since they give it traction and stability. Your capacity to steer, brake, and accelerate efficiently is influenced by your tyres' capacity to retain traction with the road. Driving conditions may become dangerous when tyre grip decreases. Because this lack of grip can be dangerous and result in accidents, it is crucial to regularly check your tyres to ensure they are safe for driving. This article covers the factors that contribute to tyre slippage, how to monitor them and when to replace them.

What may result in a tyre losing its grip?

Wrong tyre pressure

Over or under-inflation is one of the most frequent causes of tyre traction loss. Overinflated tyres have a smaller contact area with the road, which can decrease grip and stability and lead to uneven wear throughout the tyre.

Tyres that are underinflated have a wider area of contact with the road, which can lead to deformation and a loss of traction. Therefore, it is crucial to make sure your Hankook Tyres Andover are inflated to the manufacturer's recommended pressure. 

Tread Depth

A key component of tyre care is tread depth. Reduced tread depth limits the amount of contact between the tyre and the road surface as the tyre ages. The tyre may lose traction as a result, especially on slick surfaces. Because of this, it's crucial to frequently check the tread depth and replace the tyres when it drops below 3mm.

Wheel Alignment

The position of the wheels in respect to the surface of the road is known as wheel alignment. Incorrect wheel alignment can cause the car to pull to one side, which will make the tyres lose traction and wear unevenly across the surface. Additionally, this shortens the tyre's life and results in additional loss of traction.

In order to increase the longevity of your tyres and their grip, it is crucial to get your alignment examined and corrected often.

Typical Tyre Wear

A tyre will deteriorate and lose traction over time. A tyre can last up to 20,000 miles depending on driving habits. Heat and acceleration are present at this moment. It results in the rubber of the tyre deteriorating and providing less traction.

As a result, it's crucial to periodically inspect your tyres and replace them when you start to detect wheel spin or if the tread depth is less than 3mm.

Temperature Variations

Tyre grip may be affected by extreme temperatures, both hot and cold. Rubber substances may harden in cold conditions, decreasing traction. In contrast, warmer temperatures can make tyres more malleable, which may result in a reduction in grip and tread life. In extremely hot conditions, modifying your driving style and keeping an eye on your tyre pressure will help you keep your grip.

Tyre Quality and Type:

Your tyres' brand and quality have an impact on grip as well. Particularly in dry circumstances, high-performance tyres are made for enhanced handling and traction. Purchasing high-quality tyres that are suitable for your driving requirements will greatly increase grip.

Slippery or Wet Surfaces

It's possible that the road surface is the only factor contributing to your tyres' lack of traction rather than the tyres themselves. The friction between the tyre and the road surface is greatly decreased when the road is wet or icy, which can cause a loss of grip and wheel spin.

Make sure you drive slowly and have enough of tread on your tyres to assist spread the water out in order to avoid tyres from slipping on a wet surface.

How to Inspect Tyres?

You should routinely inspect your tyres for flaws. You may do this visually by scanning the tyre for anything unusual, like a nail, or by keeping an eye out for bulges, cracks and punctures. By searching for the tread depth patch, you may also verify your tread depth.

Your tyres will need to be replaced if the tread is level with the tread marker because the tread depth will be unsafely low.

A 20p coin may also be used to measure your tread depth. Simply place a coin into the groove of the tyre, and if the coin's border is visible, your tyres don't have the required 1.6mm of depth. 

What is the best time to replace your tyres?

Tyres may become less grippy for a number of reasons, including inadequate tyre pressure, insufficient tread depth, rough terrain, or misaligned wheels. It's crucial to keep up with all these parts of your car to avoid your tyres losing traction.

Even if your Mobile Tyre Fitting Andover is in decent condition and you still feel a lack of grip when driving, you probably need to get a new set of tyres.

Conclusion 

Tyre grip loss can have detrimental effects on the performance and safety of a vehicle. Maintaining ideal grip requires addressing typical concerns such tyre wear, inflation, road conditions, temperature fluctuations, tyre type, alignment, and suspension problems. Regular tyre care, such as inspections and correct tyre inflation, can significantly improve your car's ability to keep a secure grip on the road, improving both safety and driving happiness.