Oil Seeds Press Machine
OIL PRESS MACHINE is used to get fresh and pure Edible Oil at home. This machine is useful for the different types of Oil Seeds like Mustard seeds, Coconut, Peanuts, Soybean, Sesame, Walnuts, Flax seeds, Sunflowers seeds, Castor Seeds, Vegetable seeds, Almond, Castor Seeds etc.
Machine Motor is Industrial motor and it can be able to work for more than 4-5 hours continuously. The machine needs rest for 1 hour after every 4 to 5 hours of continuous work.
Convenient:
It is very convenient that can help you make oil any time, at any place. Due to today’s uncertain times, it is necessary to press pure and fresh oil for health consideration. This small oil maker machine is less expensive and much easier to operate.
Usage:
Oil Seeds Press Machine (For Home) used for Pressing of Peanuts, Coconut, Sesame, Soybean, Walnuts, Sunflowers seeds, Vegetable seeds, Flax seeds, Almond, Castor Seeds, Mustard seeds and so on.
How to Operate the Machine (Working Process)
• Press on the heating switch and wait for 10 minutes. (Do not turn it off in processing oil process)
• Put the dry ingredients.
• Press the 'Squeezing' switch and start processing the oil.
• After end of the process, you need to hold 'Cleanup' switch for 20-25(Approx) seconds, so it'll be easier to remove the screw and then you can clean, in case, if you forgot to press the 'Cleanup' switch, pressing chamber will become cold, the pressing rod (Chamber Rod) will be blocked and interior residual slag harden in the pressing chamber and cannot be able to take out for the cleaning.
• During the process, if the power goes out, please turn off the start button and also pull out the power plug. After electricity/power comes in, need to turn on the heating switch for 10-12 minutes when power is connected, so you can able to continue the press.
• First, you need to remove the pressing chamber and clean it up with water or detergent.
• turn off the power and power plug and store the machine in a dry place.
• after storing the oil for a night under the room temperature of 15 degrees or above, The pressed oil will automatically being separated and does not need to filter.
• The surface is not smooth or raw materials are damp that is why sometimes material from an aerial state in the feeding port. You can gently touch the raw materials.
Notice: do not ever try to put the finger or hard objects like a metal bar.
Cleaning Process
Step-1
First, unplug the power plug, then pressing chamber remains heat, wear cotton heat-protective gloves show as to prevent burns or wait for 30 minutes so as to let the pressing chamber cools down completely.
Step-2
Clean it up with paper or cloth, rinse and clean the pressing chamber with water after taking out the pressing rod (Chamber Rod).
Step-3
Do not ever try to clean up with acid, alkali, soda and salt water, the more raw material moisture content is, the tighter the raw material slag sticks to screws, more difficult it is to wash and you can cut it off with a knife, except the pressing chamber, other parts are forbidden to enter water or other liquid, after cleaning promptly wipe or blow the water on pressing chamber with hairdryer before storing.
How to store the Oil
After putting the oil in the room temperature of 15oC or above for one night, oil and thick liquid will separate automatically and it does not need filtering the longer, it is placed better separation effect; after the complete separation of oil and liquid, bottle it and put into the fridge or keep it at room.
We hope after reading this article you will get to know more about OIL PRESS MACHINE or OIL EXTRACTION MACHINE.
Comments