How to troubleshoot Error 1203 on a Brother All-in-One printer?
Your Brother printer may face various problems; error 1203 is one of them. It refers to the problem of short cartridge that results due to the complication in the connection problem and any short in the printheads. The printer displays one of the following messages:
- 1203 error message
- 1203 error
- 1203 cartridge error
- Cartridge short error
Brother Company being aware of all the issues faced by their devices is always ready with the methods to troubleshoot them. As the issue resulted due to the printheads incompatibility, we would need to remove these errors. In this article, Brother Printer Tech Support will be guiding you with the troubleshooting method for Brother All-in-One printer.
Do this if the cartridge is defective
But if the cleaning process does not help, then you should try and check if the cartridges are not defective. Try to start the device with either new or another cartridge that you are sure is perfect. If using different cartridges resolves the error, then you should relax as the problem does not lie in the printer. But on the off chance if you discovered that the fault is in the Brother device, then you will need to dial brother printer technical support canada 1-844-888-3870 and inform the engineers about your problem, they will provide free assistance until you feel completely satisfied with the solution provided by them.
- Switch off the power and take out all the power supply cables.
- Reinsert the cables and power on the device after 30 seconds and check if the issue is cleared.
- Remove the power supply again if the error still persists.
- Take out the top cover and move the cartridges to the center unit with the help of a carrier belt. Take out the cartridges.
- Now, you are required to moist a soft lint-free cloth with water. You will have to be very gentle while cleaning the nozzles
- Clean the cartridges once more with a dry cloth
- Wait until it dries completely
- Re-insert the cartridge in the printer and check if the problem is solved by now
Do this if the cartridge is defective
But if the cleaning process does not help, then you should try and check if the cartridges are not defective. Try to start the device with either new or another cartridge that you are sure is perfect. If using different cartridges resolves the error, then you should relax as the problem does not lie in the printer. But on the off chance if you discovered that the fault is in the Brother device, then you will need to dial brother printer technical support canada 1-844-888-3870 and inform the engineers about your problem, they will provide free assistance until you feel completely satisfied with the solution provided by them.
Read more blog :- Brother Printer Support is at your service all the time
Comments