How to Setup Your Canon Pixma MG3620 Printers

Tech Innovation

Aug 25, 2020

1164 Views

Canon Printer is a first-ever ink tank system All-in-one wireless device designed for high volume printing at low running cost. The printer has been built up in such a way that users can also view the remaining ink level easily at a glance. But when it comes to knowing how to setup Canon Pixma MG3620 printers, many users have been confused over the hardware and software installation process.

If you do not have an idea regarding the Canon Pixma MG3620 wireless setup, you are in the right place. Here, we have provided the two methods – WPS Connection Method and Standard Connection Method by which you can complete the whole set up process for your printer.

Methods to Get Setting up Canon Printer MG3620 Printers

Method 1: WPS Connection Method

Before we get started, there are conditions that must be met in order to use the WPS push button method:

· The access point should have a WPS push button. So better if you check the user-guide for details. If you don’t have the WPS push button, please use the instructions given under the Standard Connection Method.

· The network must be using the WPA or WPA2 security protocol.

Now, let’s know the steps down below:

Step 1: Ensure that your new Canon printer is turned on. Press and hold the Wi-Fi button located at the top of the printer until the indicator flashes once.

Step 2: You need to make sure that the indicator lamp starts to flash blue, then go to the access point and press the WPS button within 2 minutes.

Note: The blue Wi-Fi lamp on the printer will continue flashing while searching, and the power and Wi-Fi lamp will flash when the connection to the access point. When successfully made connection, the power, and Wi-Fi lamp will stop flashing and remain lit.

Method 2: Standard Connection Method

· Insert CD that comes with your printer and run the setup. If you don’t have, then you can download the setup from the official website of the Canon.

· Click “Next” on the pop-up screen appears.

· Select on the button – Connect to the network.

· Click on the “Cableless Setup” button.

· Choose the “Next” button until you get select your place of residence. Select your place of residence and proceed.

· On appearing the license agreement, read and proceed with the “Yes” button.

· If you could see your model and SSID on the screen, then, proceed with the “Complete” button to finish off the setting up process.

Who to Contact If You Have Any Doubts Over Canon Pixma Setup Guide?

If you are still doubts over the Canon Pixma MG3620 setup Windows OS needed for your printer to work on, feel free to get connected with our executive professional for immediate assistance.