How to fix HP printer error code OXC19A0035?
Amongst several error codes in an HP printer, the user faces can also face an error code like OXC19A0035 which diminishes the quality of printing. So, to resolve this printer error code, HP Printer Support has provided some troubleshooting methods. Just go through these methods and try to fix it up.
Try to fix it through your printing machine
You just have to turn off your machine completely by unplugging all the cables and then plug it back and turn it on again. You have to repeat this action two or three times. If still, the error is not fixed then moves to the nex method.
Open your printing device
- First of all, turn off your machine and lift up the cover of the ink cartridge and remove the ink cartridge head.
- Then check whether the ink cartridge has connectors on the lower part of the chip or not.
- If it has the connector then you have to clean that part with a soft damp napkin or any cloth.
- You can also make use of isopropyl alcohol swabs for more refinement.
- Then double check to clean the cartridge before placing it into the printer.
- After cleaning the component, place it back on your machine.
Reset your machine
- Disconnect the power cable from the electrical cord and wait for 20 seconds.
- Then press # and 3 buttons located in the front panel and continue pressing these two buttons.
- Then plug back the power cord and release the button while turning on your print device. Now your machine is reset.
If you are still facing the same error even after executing the above methods, then it is better to get in touch of an expert to fix this issue. For this, you have to call us at our HP Printer Technical Support 1-844-6513-666 and here our experts will provide you an alternate and relevant solution to resolve this error.
Comments