How to Boot From USB in Windows 10

Previously, users mostly boot the PC from CDs and Floppy disks but those days are now over. Today if you want to troubleshoot the computer, boot it from the other version of the operating system or install the Windows upgrade, it is done quickly by booting from a USB drive. Windows 10 has also made it easy to boot from USB. All you require is the USB drive that has the bootable version of Windows. If you need to boot from USB in Windows 10, then this post might be useful for you. Read through the blog to follow the instructions to get the idea of it.

Each time you boot Computer, default boot place is commonly hard-driven wherever the operating system has been installed. Though there are several times when you need to boot Computer from a USB drive, however, it is not something which is popular, but if the users may have an idea to do it, but they must not know the entire process.

How to Boot From USB in Windows 10

Boot From the USB Within Windows 10

If you need to boot from USB within Windows 10, then abide by the given steps:

1. Connect the USB drive in any of the Computer’s port.
2. Boot the Advanced Startup.
3. Click on Use a device.
4. Choose USB drive that you need to boot from.
5. The Computer is going to start again then boot from that drive.

Boot From the USB Drive in Windows 10 Computer

In case you need to boot from the USB drive in Windows 10 Computer, then you need to follow the offered steps:

1. Connect the USB drive in any of the Computer’s port.
2. Insert the Boot Menu while the PC boots.
3. This procedure may vary from Computer to Computer, so check the Computer manufacturer requirements depending on the needs.
4. Click on the USB drive that you need to boot from in the Boot Menu.
5. This procedure is based on the Computer that you run
6. You may either shift USB drive up important list via F4 and F5 keys.
7. You may also click to boot from the menu.

Boot From the USB Drive on Surface Device

If you want to boot from the USB drive on a Surface device, then you can follow the provided steps:

1. As the surface tool is switched off, connect to a USB device.
2. Hold a sound up option.
3. Tap and release the power option.
4. Hold sound up option pressed till the Windows logo or Surface vanish.
5. Boot UEFI must display.
6. Choose To configure Alternate device Boot Order option.
7. Organize orders so that a USB drive is the first pick.
8. Stop the Secure Boot Control option.
9. Start a Surface device again.

Following the procedure, you can boot both the Windows 10 Computer and the Surface device from a USB drive. Remind that this is not going to influence the ability of the device to boot usually. If it boots without bootable drive associated, it may then return to the booting from the system drive.

Chloe Decker is a self-professed security expert; she has been making the people aware of the security threats. Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. She writes for Microsoft products at office.com/setup.

Source: https://office-uk.com/blog/how-to-boot-from-usb-in-windows-10/