DIY Installation Guidelines for Vinyl Flooring

The past some years have seen a rise in the popularity of vinyl flooring Narangba very unusually and this rise has made everyone pay attention to this new sensation. The fact is that it is not a new sensation and in fact, it has been in the markets for years. 

It comes with numerous features and one top feature that is also the USP is that its installation is really easy. The fact is that it can be installed through DIY as well, but to get the best outcome, getting the installation done from the experts is recommended.

The fact is that it is totally water-resistant, makes this floor ideal for many applications including hallways, living rooms, kitchens, and even bathrooms. 

According to the vendors of carpet Narangba, vinyl floor planks are engineered to be installed in one of two methods: glue-down or floating. 

In case, you are looking for DIY installation, the best option is to go for floating or click-lock installation method. The reason is that as compared the other one, this one is fairly simple and also, the DIYer will not have to deal with the stress of adhesive, glue, mess, etc. 

In this method, the vinyl planks are inter-locked with each other and for this, they use a built-in tongue or the groove system. They can lay these planks on the sub-floor as well and with a bit more technical knowledge, they can acquire the expertise of laying it directly over the existing floor. 

This method is given the name, "FLOATING" because the vinyl flooring Narangba sits on the subfloor without using adhesives and so on. 

Because of this, there is the process of natural expansion and contraction due to humidity or in the event of temperature change as well.

As a DIY installer, you need to keep in mind that vinyl flooring Narangba  is temperature-sensitive and because of this, it is mandatory to leave a gap of ¼ inches for expansion, if the climate changes or even the temperature. 

This generally means figuring out which way, the planks should run

Preparation is extremely essential because this will allow the floor to acclimatise inside the home before being brought into use

Once all the preparation is done, now it’s time to install your first planks and for this, you will have to decide which room to cover first.

If using a floating floor style vinyl plank, connect another plank into your first plank by engaging the tongue into the groove of the first plank.  

Use your pull bar and rubber mallet to make sure that every board is properly locked into place.