Discover a Broader World of Creation with the Snapmaker 2.0 Rotary Module

What is a Snapmaker Rotary Module? This is an add-on tool from Snapmaker which is compatible with Snapmaker 2.0 and Snapmaker Artisan. It can achieve a continuous 360°c rotation and a maximum angular velocity of 45°c per second while laser engraving and CNC carving on round or irregular surfaces. The Snapmaker Rotary Module can hold items up to 6.6 inches long with its swappable 3-jaw chuck that can clamp inwards or outwards. In addition, the rotary has a base plate that can be installed in different positions.

The module enables you to achieve an ultra-fine outcome without losing any detail, and it's worth to not that it does support a variety of materials locally available like plastic, wood, bamboo, fabric, leather, non-transparent acrylic, and many more. There is no additional cost of traveling long distances to get these materials because you can also source them from within your environment. For example, you can get wood by trimming your tree's long branches right at home. In the case of plastic, we can recycle the ones we've used for other purposes to create something artistically attractive rather than just disposing of them. Doing so will also depollute our environment, thus bettering our lives and livelihood.

With the help of the Snapmaker 2.0 Rotary Module, you will agree that the Snapmaker has some remarkable capabilities that make it the most effective laser and CNC machine. Its rotational module is well honored for its capacity to print desktop miniatures and other small sculptures in addition to 3D artworks. Be assured that the craftsmanship you shall attain will be of the highest stature once you have the Snapmaker Rotary Module.

Below are the overall features of the Snapmaker Rotary Module:-

·    Origin Assistant and Auto Focus features.

This is a new touchscreen feature that ensures you a smooth experience and interaction with rotary carving. With this feature, the presetting CNC bits, setting origins and Z- offsets, and material installation are now more straightforward. You as well make it your way by selecting Assist Mode for a more complex progression or Manual Mode for more flexible controls.

·    Swappable 3-jaw chuck.

It supports objects with sizes of up to 170mm in length and a radius of 68mm with the tailstock or 225mm in length and 68mm without the tailstock. The available compatible chuck in the market can also be used.

·    The emergency stop button.

Your confidence while carrying out your project with the Snapmaker Rotary Module is boosted by combining the Snapmaker Emergency Button. How? If, in any case, something goes wrong amid your print job, you'll press the Emergency Button, and you start fresh again. This button can be installed practically anywhere you can reach it with ease.

·    Base plates with holes - can be installed in different positions.

With the holes, you can install the headstock and tailstock at different locations.

·    Glowing status indicators for extra reliability.

The Emergency Stop Button connects to the central controller of the machine, thus sending a stop signal to the controller at your order, and has glowing status indicators, green for standby, flashing red for activated, and alternating between green and red for connecting, so you know you are protected.

With your Snapmaker Rotary Module properly installed, you shall have no limitation on realizing your full creative potential. Put your idea into something amazingly unique and outstanding. The Snapmaker team has you covered. Your only responsibility is to visit the website and please don't forget to buy this product.