Category performance and use of mobile crushing station
1, the category and the performance of mobile crusher
Mobile crusher, more accurately should be called mobile crushing
station, because it is in addition to the crusher, also with out
equipment and facilities. Different mobile functions can be divided into
fully mobile, semi-mobile and the portable. Conditions using three
different crushing station, we need to consider the following aspects of
the selected.
Full mobile crushing station, also known as self-propelled crushing
station. Press walking can be divided into crawler, rubber tire type and
walk-three kinds. Flexibility three kinds of ways of walking is not the
same, so the uses are different. Crawler excavators can follow the
work, but the body bulky, restricted, smaller capacity, currently known
maximum capacity of 1000 tons / hour. Walk-tire formula and do not
follow the excavator operation, they can only work in a relatively fixed
conditions. Their large production capacity, has a lot to reach 2000 to
3000 tons / hour of crushing station use. Self-propelled crushing
station is the basic characteristics of a fully functional monomer feed
and discharge are on the same platform, referred to as “flat into the
flat.”
Semi-mobile crushing station need outside help to move. Some progress
can be on the same platform and outfeed, and some need to feed on a
platform, the host platform stands out material, referred to as “Ping
Jin-ping out” and “motivated flat out.” The former can be achieved at
any position on the use, and the latter will have to use a higher level,
its location has some limitations. “Motivated flat out” crushing plant
because the use of a higher level of height, volume increases hopper,
feeder shortened, more suitable for large-scale mining use. Currently,
the world’s largest semi-mobile crushing stand in a copper mine in
Chile, its capacity is 9600 tons / hour.
Semi-mobile crushing station crushing station in orbit, crushing station
and pack moved on flatbed trailer type crushing station. Large
semi-mobile crushing station usually used to move the pack type move. In
order to facilitate the relocation, often it is separated into a number
of monomers, such as silos and feeder composed of a monomer, another
monomer crusher, belt conveyor discharge as a monomer, so that each
relocation unit the reduced weight. Since the mule car is expensive, low
utilization, some mines are also other ways to move.
Semi-mobile crushing station is float planes on the ground, without a
solid concrete foundation, on the ground carrying capacity of no less
than 250kPa to use.
The portable crushing plant, also known as assembly crusher station, it
is a structure fixed and mobile crushing station ranged, can be used in
relocation infrequent (more than two or three years) situation. They can
be dismantled into several large pieces, in line with its size and
weight lifting capacity of the crane and trailer carrying capacity, the
time depends on the relocation of an expenditure of advance preparation,
the break level, the relocation journey distance and organizational
circumstances.
2, the use of all types of mobile crushing station
According to the characteristics of the cement limestone mining,
crushing station made basic types and conditions three kinds of crushing
modes, for reference.
Only for a crushing plant is concerned, if a larger scale, the proposed
two sets of crushing plant, and the accompanying style around-loading
range of applications will be expanded.
When the mine is high and large ore rock solid, cut inside chute, set a
fixed crusher station in the mine, ore crushing and then after the belt
conveyor shipped mining field to the factory, but also make full use of
the potential energy saving production processes, and broken station
does not have to move, easier. This production process has long been
applied in a number of cement plants.
Post Your Ad Here
Comments