A To Z Detail Of Linksys Extender Setup

Posted by Alice Garten
3
Nov 16, 2022
319 Views
Do You know how to set up a Linksys extender at home or in the office? If your response is no then, dont be fear we are here to give you a simple or easiest method to set up your Linksys extender in a few minutes. So read this article carefully,

Firstly, you want to know about the

Basic Needs For The Setup Of Linksys Extender

● The first and most important thing is to have a Linksys extender and an active network adaptor.

● If you dont have anyone from them then you can’t proceed with Linksys extender setup or login.

● You will also require an ethernet or USB cable to connect your extender to the computer.

● However, we have another option such as WiFi.

● It may be working in most cases.

● However, it varies as to which connection serves you best in your scenario.

Guide Of Linksys Extender Setup

Linksys WiFi extender is the best solution and perfect solution to improve the weak strength of WiFi signal in our house or in office. Linksys is a front leading manufacturer of extender that is not only easy to set up but also equally easy to maintain. In that case, if you are looking to set up a Linksys extender then you came to the right place.

Condition For Extender Setup

Connect your Linksys extender to a power outlet that is in the range of router or AP mode. You may require an extension board if you are far from it. If you are having multiple extenders then you will not need to connect the extender to a power outlet in a distant room.

Turn on your device by pressing the ON button on each of them. Now, wait for the LED lights to turn on. To perform a power cycle, put it out from the power source and wait for 30 seconds to put the plug back in it.

Setup Process Of Linksys Extender Via WPS

Simply follow all the below-mentioned steps and get the Linksys extender setup in less time. You must read this carefully if it is your first extender setup.  
There are two methods by which we can set up our extender

1. Manual method

If you want to set up their WiFi extender manually, then follow these points.

● In the same room bring your laptop or computer and a WiFi range extender.

● Now put the plug of the range extender or computer in the power outlet.

● Type IP address 192.168 1.1 in the URL bar of a web browser.

● A login page will appear on your screen and fill in all the login credentials shown on them.

2. WPS method

WPS acts as a security standard for a wireless network which helps to get a stable connection between the extender or wireless devices such as mobile phones, laptops, computers, etc. Now you want to know how we can make use of the WPS button.

● Use Of WPS Button

->Place your range extender in the electrical power outlet,

->Now, press the WPS button on your extender, or just within two minutes press the WPS button on your router.

->The green LED light indicates that the setup of the extender is completed or successfully done.

Note: If you have a dual-band WiFi extender then follow these same steps once again.

Setup Your Linksys Extender In AP Mode

When your extender works in access point mode then it means that the extender expands the speed of network by connecting to the router or access point mode with the help of an ethernet or USB cable. 

After this, authorize your extender to have minimal performance of loss and drop of connection. If you are interesting to want better WiFi speed then carry your Linksys Extender Setup process in AP mode.

Condition For Extender In AP Mode

Before you start Linksys extender you must ensure the following 

● Network name and password of WiFi.

● An Ethernet cable is enough to connect extender to router.

Now, go for the below guidelines to setup Linksys extender in AP mode.

● Place the plug of Linksys extender in power socket and turn it on.

● Join one end of the ethernet cable to extender and another end to router.

● Now, open any web browser of your choice.

● Go to the setup page of Linksys.

● Click on the range extender access point option. Hit on enter button.

● Create your WiFi password for Linksys extender and save it.

Conclusion

After the full theory of extender setup, we hope you must be able to set up an extender at home with these few tips. Feel free to give us feedback in the below comment section on how you can feel. Stay tuned for more updates.

Comments
avatar
Please sign in to add comment.