9 Problems to be Noted in The Process of Threaded Rod Heat Treatment Furnace.

The threaded rod heat treatment furnace is a common induction heating equipment in the modern threaded rod heat treatment industry.

1. Cooling water should be spotless and liberated from debasements. In the event that the water quality is really awful, channel should be added at the water delta. Water deficiency is restricted when working. 

2.In use, the inductor should be shielded from hamper. 

3. Inductors should be kept clean consistently, particularly multi-go inductors to forestall between turn cut off, contact should be kept clean to forestall oxidation. 

4. The principle power gadgets in the hardware are water-cooled. The temperature of cooling water is essential to the cooling impact of the force gadgets. Try not to kill the cooling water during the span when the force gadgets quit working. For the clients whose heap constancy rate is 100%, the cooling water temperature should be lower than 40 ℃. Delicate water is suggested under the conditions. 

5. Clients who utilize normal water as cooling water ought to consistently (contingent upon the nature of water, generally two months as a cycle) descaling the lines in the gear to forestall harm because of helpless warmth dispersal. The cleanser is chosen from the regular vehicle water tank cleanser, weakened at 1:40 and siphoned straightforwardly into the gear pipeline for cleaning. 

6. The machine of enlistment warming and warmth treatment creation line should be kept clean, and the residue on the circuit board and different parts should be taken out consistently with brush and packed air. 

7.Keep the air-cooled and water-cooled paths unhampered whenever. 

8. The flexible gadgets of the inner circuit leading body of the gear are firmly identified with the unwavering quality and wellbeing of the hardware, and clients and work force are not permitted to change without approval. 

9. Inductor association board, principle machine and transformer association joint should be often sanded with sandpaper, clean with liquor, keep in touch.