How to Port BOA to the FET-MX9352-C Platform on Linux 6.1.36?

In the management and interaction of embedded devices, the application based on Web mode has become the mainstream. This kind of server not only occupies small resources and runs efficiently, but also can dynamically generate page content according to actual needs. For users, they can realize the remote management, status monitoring and function control of embedded devices only through the commonly used Web browser, without installing additional software or complex configuration.

BOA is a lightweight, efficient, and embedded Web server known for its minimal resource consumption and straightforward configuration. It is particularly suited for devices with limited memory and processing capabilities, providing essential Web functionalities. This article describes how to port the boa server on the FET-MX9352-C platform.

How to Compile Source Code?

Download address:

http://www.boa.org/

1. Install dependent libraries

sudo apt-get install bison flex

Unzip the source code in Ubuntu

$ tar xvf boa-0.94.14rc21.tar 
cd boa-0.94.14rc21/

Modify the boa source code

Modify src/compat.h

find

#define TIMEZONE_OFFSET(foo) foo##->tm_gmtoff

Modify to

#define TIMEZONE_OFFSET(foo) (foo)->tm_gmtoff

Otherwise, an error occurs:

util.c:100:1: error: pasting "t" and "->" does not give a valid preprocessing token make: *** [util.o]

error 1

Modify src/log.c

find

if (dup2(error_log, STDERR_FILENO) == -1) {
	                  DIE("unable to dup2 the error log");
                   }

Modify to

/*if (dup2(error_log, STDERR_FILENO) == -1) {
                         DIE("unable to dup2 the error log");
                   }*/

Otherwise, an error occurs:

log.c:73 unable to dup2 the error log:bad file descriptor

Modify src/boa.c

find

if (passwdbuf == NULL) {
        DIE(”getpwuid”);
        }
        if (initgroups(passwdbuf->pw_name, passwdbuf->pw_gid) == -1) {
        DIE(”initgroups”);
        }

Modify to

#if 0
        if (passwdbuf == NULL) {
        DIE(”getpwuid”);
        }
        if (initgroups(passwdbuf->pw_name, passwdbuf->pw_gid) == -1) {
        DIE(”initgroups”);
        }
        #endif

Otherwise, an error occurs: boa.c:211 - getpwuid: No such file or directory

Set environment variables and compile

. /opt/fsl-imx-xwayland/6.1-mickledore/environment-setup-armv8a-poky-linux
./configure --host=arm-linux
make
aarch64-poky-linux-strip src/boa

At this point, the boa has been cross-compiled

Expected file path examples/boa. conf and SRC/boa

2. Modify boa.conf

vi boa.conf

(1) Group modification

Modify Group nogroup

to Group root

(2) User modification

Modify User nobody

to User root

(3) Modify DocumentRoot

DocumentRoot /var/www

(4) Modify ScriptAlias

ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/

(5) ServerName settings

Modify #ServerName www.your.org.here

ServerName www.your.org.here

Otherwise, an error will occur “gethostbyname::No such file or directory

3. Compile the test file

Unzip the source code in Ubuntu

tar xvf cgi_app.tar.gz
cd cgi_app/

Clean up the files

make clean

Set environment variables and compile

. /opt/fsl-imx-xwayland/6.1-mickledore/environment-setup-armv8a-poky-linux
$CC -o app.cgi cgi_app.c cJSON/cJSON.c

Generate app.cgi

4.Arrange to the development board

To create the directory, enter the following command on the development board.

mkdir /usr/lib/cgi-bin
mkdir /var/www
mkdir /etc/boa

mkdir /usr/lib/cgi-bin/ Table of ContentsPut app.cgi in the /usr/lib/cgi-bin/ directory

Put index.html, xmlhttpreq.js to /var/www/ folder

Put boa.conf in the/etc/boa/directory

Place boa in the/usr/bin/directory

Place the mime. Types in the/etc/directory

Modify permissions

chown root:root /var/www/*
chown root:root /usr/lib/cgi-bin/app.cgi
chmod  o+x /usr/lib/cgi-bin/app.cgi
chmod  o+r /usr/lib/cgi-bin/app.cgi

Turn off the original network services

Because 9352 self-started lighttpd services, ps aux | grep http can see his process ID. To disable the startup of the Lighttpd service, vi /lib/systemd/system/lighttpd.service change line 8 and 9 to

#ExecStartPre=/usr/sbin/lighttpd -tt -f /etc/lighttpd/lighttpd.conf
#ExecStart=/usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf

Create a log file

Vi/etc/autorun. sh Write this in mkdir/var/log/boa and restart

Start the boa by entering the following command on the development board.

boa

The computer and the development board are directly connected through the network cable, and the computer opens the browser to access the IP of the development board.

http://192.168.0.232/

Originally published at www.forlinx.net.