Common Car Repairs Sydney Drivers Encounter

Common wear and tear on vehicles is a problem that all drivers have to deal with. It’s something that no driver will be able to escape so it’s best to identify the tell-tale signs that there’s a problem and do what’s necessary to avoid costly repairs. On that note; let’s run through some common car repairs Sydney drivers encounter and the signs that indicate there’s a problem.

Brake Repairs

Any Bexley mechanic will agree that brake repairs take up a huge portion of their workload. Sydney’s traffic is hectic and stopping and starting wears down brakes and causes the discs and pads to get damaged. Signs that you need to look out for include squeaking noises, warning lights on the dash and a longer stopping distance when breaking.

Tyre Thread 

Uneven surfaces and tight urban parking can cause premature wear and tear on tyres. There are lots of tell-tale signs to look out for when it comes to pinpointing problems with tyre thread; these include uneven tread wear, balding tyres, vibrations when driving, and loss of air pressure. Maintaining proper tyre pressure is essential for safe driving so be sure to get these issues checked with a Bexley mechanic  as soon as you realise something is wrong.

Battery Replacements

Short drives in and around the city can cause the need for a premature battery replacement as the short trips don’t allow for adequate charging. Signs that you need to replace your battery include problems with the starter, dimmed lights and electrical issues. Our advice here is to regularly do a health check on your battery and avoid leaving any system running when the engine is turned off. Yes, that includes the radio!

Air Conditioning System

Summer puts a lot of pressure on the air conditioning system in your vehicle so it makes sense to give it some extra TLC when the temperatures start to increase. Book an appointment with your local mechanic if there’s a strange noise or vibration coming from the AC vents in your vehicle. You should also watch out for weak airflow or a failure in the temperature to change once you turn the dial to cool.