A Brief Information About the Most Common MOT Failure?

Hey, we’ve laid out all the secrets of the most common reasons why a vehicle does not pass the MOT Test. Well, a vehicle’s all components should be in perfect condition so that there is no issue with safety and comfort and it also remains environment friendly, that is why a lot of inspections are done during this test. That is why you should pay more attention to getting them all diagnosed or repaired, especially the ones we have already talked about in this blog since motorists often end up failing due to taking them lightly.

Wipers 

Wipers are also checked during the MOT Test in Shirely as its job is to clean the windscreen. So, do not take it lightly and do not keep it in poor condition otherwise it can be a danger, especially when it is raining. Understanding this scenario, the examiners also check whether it is damaged, struggling in smooth movement or there is a pebble stuck in it that is causing scratches on the windscreen.

Windscreen 

No doubt, a windscreen is an important part of every vehicle, but sometimes we don't pay attention to its cleanliness and maintenance, am I right? However, the examiners at the MOT centres will not ignore it at all as it is stipulated under the rules set by the DVSA. Considering the importance of the driver's clean outside view, the windscreen should not only be unshattered but also its presentation should not be affected due to any sticker or paper pasted on it. Often motorists fail the MOT test considering it a normal case. 

Suspension System 

The suspension system plays a major role in ensuring a comfortable ride as it absorbs the shocks in such a way that they do not affect the occupants of the car much. It should be repaired or diagnosed on time as there are many things involved in it and over time one can experience problems. At the MOT station, testers also inspect their overall condition. If they find anything a little out of order, they declare the MOT result status as fail. The performance of other parts of the vehicle, such as tyres, wheels and steering, also gets reduced due to its problematic functioning.

Tyres 

Tyres are a component that makes our vehicle run. It faces a lot of rigours in our world, so we recommend checking it regularly. As it gets used, its depth also gradually decreases, which we usually cannot recognize by looking at it. At a point when they become so worn that their depth exceeds 1.6 mm, the minimum legal requirement, they are unable to provide adequate grip on the road, which can be dangerous as the vehicle may go out of control. However, we would advise you here to replace them when the 2.0 mm depth is left. Apart from this, testers also inspect their appearance to know if they are wrinkled or damaged, as all this makes them vulnerable. 

Lights 

Every light in the vehicle should be in good condition, be it signal lights, dashboard warning lights, headlights, tail lights, fog lights, day running lights and others. All of these contribute to making the ride safe by making things visible while driving, notifying problems in any essential parts, understanding the presence of other vehicles and driver movements, preventing collisions between vehicles and much more.  So, whenever you go to get your vehicle’s MOT test done, first ensure that there are no light-related issues as this is considered to be one of the most common reasons for failing the test. Hidden lights, broken bulbs, or lack of adequate brightness all such things make them unsafe to use. 

Note:- There is also an exception under MOT, if the vehicle's front and rear lights are not working properly or having any problem, still a pass certificate can be obtained. However, one thing to keep in mind is such the vehicle is allowed to be driven only during the day as safety might be compromised when it gets dark.

Vehicle Registration Plates 

Vehicle registration plates, also known as number plates, contain various letters and numbers. When all of these are in the correct order, basic information like vehicle identification can be found in a jiffy by scanning the plate. Their role is very important in many cases such as when a car is stolen. This is why it is a rule to inspect them during MOT and if the tester finds some deficiency in them such as any letter is missing or not clearly visible then the plate will be rejected.  

Exhaust System 

The exhaust system involves several parts like the catalytic converter, exhaust gas recirculation, diesel particulate filter, manifold and many others to convert all the toxic gases produced by the engine to a great extent. Then, several components and liquids help in releasing these converted emissions. All these are carefully checked when your vehicle undergoes MOT Test in Birmingham because if the gases are not changed properly then they will pollute the environment which leads to making livelihood challenging in future. When a gas release is dealing with leaks or cracks, it directly affects the health of the people in the vehicle.