Step-by-Step Guide to Making a Moulded Candle

Now that you know what materials to use. Make a Unique Candle with Candle Mould. let’s walk through the process of making a moulded candle using both metal and silicone moulds. Make a Unique Candle with Candle Mould.

Making a Candle in a Metal Mould

1. Prepare the mould: Ensure the mould is clean and dry. Thread the wick through the pre-drilled hole at the bottom and seal the hole with mould sealer.
2. Melt the wax: Heat the wax to the recommended temperature. Stir in fragrance or dye if desired.
3. Pour the wax: Slowly pour the wax into the mould, reserving some for a second pour to avoid sinkholes.
4. Create relief holes: As the wax begins to set, poke holes around the wick to release air pockets.
5. Second pour: Reheat the reserved wax and pour it into the mould to fill any gaps.
6. Unmold the candle: Once fully set, carefully remove the candle from the mould and trim the wick.

Making a Candle in a Silicone Mould

1. Insert a wick pin: Place the pin in the center of the mould.
2. Melt the wax: Heat the wax and stir in any additives.
3. Pour the wax: Pour the wax into the mould, adjusting the pour temperature for a matte or glossy finish.
4. Remove the wick pin: After 2-3 hours, gently remove the pin and insert a pre-waxed wick.
5. Unmold the candle: Carefully remove the candle, ensuring intricate details are not damaged.