4 Excellent Tips to Maintain Reimer Volumetric Mixer Parts

A volumetric mixer is an improved version of a concrete mixer, or as many professionals like to call it, cement mixer. It provides homogenous mixtures of cement, aggregates, and sand or gravel. However, the difference that a volumetric concrete mixer makes is that it does so in extremely controlled quantities.

A traditional cement mixer brings together all the materials with the help of a revolving drum. A majority of small-scale tasks find portable concrete mixers to be sufficient. In case of large-scale projects, the contractor may opt for in-transit mixers and parts such as Reimer volumetric mixer parts.

Important and Simple Ways to Protect Reimer Volumetric Mixer Parts

Purchasing a volumetric cement mixer is a sizable investment that you can gain great returns on. This requires consistent maintenance along with regular construction equipment painting in order to extend its life as much as possible with the following steps:

Maintain a working engine: Ensure the diesel-powered engine remains in proper working condition by keeping it clean at all times. Wipe the engine with a damp cloth from time to time. If you can’t reach loose particles with the cloth, you can get rid of them with the help of an air compressor.

Doing this regularly is important because dust and cement particles can reach the engine and cause blockage otherwise. The engine will stop working once this happens and will require more expensive repairs than Reimer volumetric mixer parts maintenance.

Rinse the drum: Clean the paddles and the drum on a regular basis so they last longer. It is quite simple to maintain the drum as you only have to pour some water in the mixer and turn it on. The drum will clean itself to a large extent by rotating many times, after which you can pour out the dirty water.

You may use a pressure hose to remove concrete remnants from the inside of the drum.

Removing stuck concrete: This can be done by tapping on the drum from the outside whilst water is rotating within the drum. If there are hardened concrete lumps stuck inside, they will fall off. You can add cleaning products to the water if this doesn’t work, such as heavy-duty products that are acid-based. These days, you can also pick something that is more eco-friendly and not as toxic to clean the drum and construction equipment painting services.

Maintain a daily checklist: Before you begin using the truck, make sure to go through all its parts every day. It will not only help from a maintenance aspect but will also keep you safe from potential safety hazards. Also grease all the parts and the pulley regularly beforehand to avoid friction damage.

Keep Workers Safe with these General Rules

 

There are certain ways to maintain safe use of your concrete mixer. To start with, each operator must read the instruction manual for their mixer before they begin operation. It is also essential to look for any tools that may have been left inside by mistake. Also check whether all the nuts and bolts are tightened.

Each of ProAll’s volumetric mixers contains Reimer volumetric mixer parts, such as guards and covers. It is important to place them carefully and ensure good working order. Always keep an operator near the machine while it is under operation. Additionally, do not load the drum if it is stationary and avoid loose clothing and jewellery that may get in the way during operation.