Launch CNC-801A Technology And Use Tips | VtoolShop
Big object big promotion !!!
Get you most ideal original Launch CNC-801A and Launch CNC-602A injector cleaner from vtoolshop.
1.CNC-801A injection cleaner & tester
developed with the technology of ultrasonic cleaning and fuel pressure control,
801Ais an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions.
It can also perform cleaning on the injectors and fuel supply system on vehicle.
2.Features and Functions:
Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
Uniformity/Sprayability test:
To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight.
This test is also for reverse flush.
Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
Injecting flow test: To check the in
3.Specifications:
Power supply:AC220V±10%/50Hz~60Hz AC110V±10%/ 50Hz~60 Hz
Input power: 250W;
Ultrasonic cleaning power: 100W;
Simulated RPM range: 10~9990rpm; step: 10rpm;
Count range: 1~9999 times;
Pulse width: 0.5~25ms; step 0.1 ms;
Fuel tank capacity: 4700ml;
Dimensions: 550mm×530mm×1400 mm;
Weight: About 80kg.
5.Spare Parts:
Adaptor 1 for fuel top-supply injector,Swiss thread adaptor for fuel top-supply injector,Coarse thread adaptor for fuel top-supply injector,Plug for BUICK injector,Hexangular Stopper,O – ring,CNC-Pulse connecting wire,connnecting hose for on-vehicle cleaning,Flush-back Adaptor for fuel top-supply injector,On-vehicle cleaning kit,Ultrasonic Cleaner.
6.Packing: Paper box
Launch CNC602A injector cleaner&tester is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
Feature Launch CNC-602A injector cleaner & tester
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test: To test injectors by simulating different working conditions.
* On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
Specification Launch CNC-602A injector cleaner & tester
* Power supply: AC220V±10%, 50/60Hz;AC110V±10%, 50/60Hz.
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 10~9990rpm; step: 10rpm;
* Time range: 1~9999s;
* Pulse width: 0.5~25ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm;
* Weight: About 35kg
Spare Parts Launch CNC-602A injector cleaner & tester
If you like the car diagnostic tools Information you can see the car tools blog .
Comments