The installation of laminate flooring

Posted by Groshan Fabiola
153 Pageviews
To begin with, laminate flooring is known to have several advantages when it comes to the remodelling of the home. As opposed to other possible option such as hardwood, tiles and stone, it last longer and makes practically any housewives job easier while at the same time giving the impression that you have natural wood in your house. The durability is given by the plastic composition that makes it free from stains and scratches. In addition to this, the installation process of laminate floors is simpler in comparison to granite Ottawa. There is no need for specialized knowledge on how to apply the tiles; virtually anyone can do it with a little help. Laminates can be found in any market and there are special tools available for the connection of pieces. Firstly, the most important thing to keep in mind is the fact that precise measurements have to be taken so as to avoid ending up with possible gaps in the floor. The beginning is also the trickiest part of the process due to the fact that when performing the necessary calculations many encounter unforeseen imperfections in the walls or other areas. Apart from this, no row will turn out perfect. Even professionals are required by the situation to make cuts along the ways so as to obtain some symmetry. Also, the gaps need to be taken into consideration when the measurements are done. Depending on the place where you have chosen to install the coating, you should get rid of any things that later on may turn out to interfere with your work. This literally means any appliances that might be lying around and also furniture that can get damaged or stained. Sometimes, the new coating is meant to replace the existing one, so make sure that you carefully remove the linoleum or wood flooring Ottawa without bringing any damage to the surface.

Furthermore, the installation process goes from the left to the right. Laminate should be applied on a smooth surface such as vinyl. The layer should be cleared of any nails or staples that might be found, which is usually done with the help of a utility knife.

At first, it is necessary to put in the planks and observe if they properly cover the surface so as to be able to cut and adjust them. In order to get clean cuts, you should make use of a circular saw that will not snip the decorated side. If there is no need for cutting, then you can begin inserting the full planks.

The installation of the first row is done by putting the planks so as to face the wall. The planks are connected to each other by using tongues and grooves. The same goes for the next rounds and there will be need for cutting around door castings. In the end, it is important to remember that before laying out the rows of planks they should sit for at least a day or two in the room due to the fact that they either contract or expand according to the temperature and humidity of the room. It is so simple that anyone can do it.

For more information on flooring Ottawa and granite Ottawa, please click on these links!