Ucontrol Z170REG signal splitter information

Ucontrol Australia are a stocking distributor of DIN rail signal conditioning devices such as signal converters, signal isolators and new leading edge product the Z170 signal splitter.  Unlike a standard signal converter the Z170REG signal splitter provides 2 isolated independent analog outputs which can be programmed for standard 0-10V or 4-20ma active or passive signals. 

In additon to this, any part of these standard ranges can be programmed using the free EASY wizard based PC software utility.  Unlike similar signal splitter products marketed by our competitors, the versatile Z170REG signal splitter can provide for example, a 4-20mA on channel 1 and a 4.2 to 9.6V on channel 2.

The impressive functionality does n't stop there.  The Z170REG signal splitter also can accept the widest range of signal inputs of probably any device of its type.  These inputs include Type K,J,R,S,T,N,E thermocouples, PT100, PT1000 sensors, 0-10K potentiometer, (0) 4-20mA, 0-10V or any part of these ranges and mV signals, again if using 4-20mA this can be active or passive. 

If PC programming is an issue and as in 80% of cases the you are dealing with standard signals and ranges, no problem. most common ranges can be set using on board dipswitches accessed on the side of the device or by live scale signal injection.  The power supply for the Z170REG signal splitter is a wide ranging 10-40VDC or 18-28VAC can be used.  If using AC a 18VDC supply is available from the The Z170REG signal splitter for powering of external 2 wire transmitters.  Z170REG is a member of a large family of signal conditioning devices stocked by Ucontrol.