A Step-By-Step Guide For After Renovation Cleaning

Home renovation is a thrilling process; however, dealing with the aftermath can become overwhelming. Dust, debris, and construction waste are always going to be present regardless of how well the renovation has been planned. These unpleasant bits and pieces, if not cleaned properly, can cause health problems, especially when it comes to very fine particles like sawdust and drywall residue. Here is an after renovation cleaning guide to assist you in getting organised and enjoying your new surroundings.

Removing Construction Debris: After all, the first thing to do before cleaning is to remove anything that might be left behind, including, but not limited to, tiles, glass, wood, nails, and paint buckets. Place these things in heavy-duty garbage bags or carton boxes for easier disposal. For your safety, have on any safety gear needed, including gloves and rubber boots.

First Stage of Builders Cleaning:

1. Seal Areas That Were Not Affected: Seal off all rooms that were not involved in the renovation for builders cleaning . Block vents and openings of the HVAC system to control dust spreading.

2. Dust & Wipe Surface: Dust and clean from the top to the bottom. Dust the grilles, vents, blinds, ceiling fans, and windows along with a careful wipe-down of any surfaces. Dry dusting is safest for delicate surfaces; allow dust to settle before vacuuming or mopping the floors.

3. Vacuuming Furnishings & Upholstered Carpets: Use a vacuum with a HEPA filter to suck dust out of soft furnishings or steam clean with a solution.

4. Sanitise the Floors and the Surfaces: Sanitise the floors and wipe clean cabinets, shelves, doorknobs, and fittings.

5. Clean-Up for Kitchens and Bathrooms: Deep cleaning of appliances, countertops, and cabinets. Squeegee glass doors and shower inclosures.

Deep Clean Phase

After the first round of after renovation cleaning, there are hidden particles that need attention. The second phase guarantees a spotless home.

1. Clean-Up of Plaster Dust: Plaster dust may be tough, and cleaning it off may require some help: mixing white vinegar with warm water. Mix two cups of vinegar with one litre of water and use the solution along with a soft cloth to wipe down all surfaces. Do not soak plaster walls heavily, as this could contribute to staining.

2. Removal of Fine Dust: According to the expert from builders cleaning fine dust can remain long after any amount of vacuuming. Slightly dampen a microfiber cloth, then wipe all surfaces. Repeat as many times as necessary until the last fine particle has been removed. A vacuum cleaner with a brush attachment will help to lift the remaining dust and dirt.

3. Cleaning of Wood: Wood is highly sensitive to water, so minimise just wetting the woodwork. Dust can be removed with a microfiber cloth slightly moistened in a solution of white vinegar and window cleaner, which damages neither the finish nor persists in undesired areas. After drying, wipe dry with a clean microfiber cloth to eliminate any moisture.

4. Cleaning Up Brick Dust: Brick dust is heavier than other debris and can stain surfaces. Use intense sucking powers to vacuum the area. Have a solution of hydrogen peroxide and water (1.5 cups to one litre) for cleaning hard surfaces. Keep brick dust away from carpets and upholstered surfaces; it is next to impossible to remove. Gently brush to dislodge dust from tricky areas with stubborn fibres, then vacuum up the debris.

Final Thoughts

After renovation Cleaning depends primarily on the size of the renovation, but cleanliness after the renovations is essential. You can do it yourself, but with professionals, it would save you much time and effort. No matter what, whether you work alone or with professionals, a spick-and-span house lets you enjoy every minute in your newly renovated house.

Author’s Bio: This article’s author, who is an expert in builders cleaning, frequently writes on the same topic to inform readers.