The Best Features And Benefits Of Automatic Floor Scrubber Machine

Floor scrubbers, especially automatic scrubbers are some of the most useful products in the cleaning industry. The floor scrubber machine is built for serious cleaning, yet they require important knowledge about the best applications and uses.

The Advantages Of Floor Scrubber Machine

Low-moisture automatic scrubbers, when compared to traditional floor mopping methods, can provide the most efficient and effective way to clean floors in the commercial setting.

Simply put, a nice and fully automatic floor scrubber is designed to do a multitude of task at the same time. With just a single pass, the auto scrubber can apply cleaning solutions to the floor, scrub it, strip it, vacuum it and squeegee it dry.

Now, it is the agitation, along with the cleaning chemicals used, that loosens and remove soils. The end result is that floors cleaned by scrubbers are cleaner than those cleaned using traditional methods.

Auto scrubbers produce low-moisture and provide constant contact with floor, making pick-up and drying time better than before.

These machines also reduce down-time, allowing heavily trafficked areas to only briefly close down for cleaning.

Since the equipment is designed to carry out so many floor care procedures so quickly, the use of automatic scrubbers can be very cost-effective.

In several situations, the floor scrubber machine pays for themselves in a matter of months since worker productivity is enhanced so significantly.

Operation

Keep in mind that automatic scrubber cannot just be turned on and used like a vacuum cleaner. These are often heavy machines, each weighing approximately 350 pounds. However, some models weight even more. Plus, they can have substantial mass.

Manoeuvring, turning, and operating an automatic scrubber can be difficult without the proper training. However, once the user knows the proper operation, using scrubber dryers becomes second in nature. Training is needed to not just operate the machine, but even more importantly, to operate safely.

Lastly, users must know how to care for the machines. You must pay attention to proper maintenance to make it work properly. Now, proper maintenance results in years of dependable service with less downtime.

Choosing A Scrubber

Often, one of the first questions asked by a commercial cleaner is: what type and size of scrubber should you select? The answer depends on how the facility is used, the amount of foot traffic, the floor type, etc.

However, there is one good rule of thumb: if the total floor area to be cleaned exceeds 1500 square feet, it is best to select a walk-behind automatic floor scrubber machine.

As the name implies, the worker walks behind the machine, gently pushes it or, if the machine is self-propelled, guides it over the floor.

For very large floor areas, cleaning experts may want to consider a ride-on floor, where the cleaning worker can either stand or sit on the machine.

Stand on floor scrubbers provide the operator with a better vantage point, significantly reduce the amount of steps taken, and allow for easy to on and off machine.

In other words, you can choose your floor scrubber as per your need.