How to Maintain Frameless Glass Shower Doors in Oakville

Frameless glass shower doors are a recent trend that Oakville residents find most ideal for transforming their master bathroom into a luxurious enclave. Regarding the design, these shower doors have a very thin profile, the lines are smooth, and the presence of the doors themselves create an untainted look of spaciousness that will positively impact any bathroom. But ensuring frameless glass shower doors in Oakville are well taken care of is critical to ensure their longevity and looks are retained to the best level possible. This article gives true and simple advice on how to take proper care of these beautiful doors and how to keep them for a long time.

 

1. Daily Maintenance: Squeegee After Each Use

Actually, perhaps the best way to keep your frameless glass shower doors clean is through using a squeegee after each time that you shower. When washing and rinsing, water droplets and soap residue on the glass surfaces may combine to cause appearance of blots and discoloration of water spots, streaks, and soap scum. For example, for a few seconds it takes to squeegee this glass one can make sure they do not get those marks accumulating.

 

Squeegeeing the glass often not only maintains the cleanliness of the glass in between washes, it also prevents the formation of hard to remove dirt later on. It is a simple practice, which can be useful for prevent or reduce the risk of fogging and dullness of the frameless glass shower doors.

 

2. Use a Non-Abrasive Cleaner

On window frameless glass shower doors in Oakville cleaning, it is important to use the right cleaner. Do not use strong dissolving solutions, abrasives or rough sponges or any item that might harm or etch the glass surface. In its stead, use a low, non-heated glass cleaning solution, or even a mix of water and vinegar.

 

To clean the glass:

·        Put the cleaner on the surface and allow it to work for several minutes.

·        Wipe the glass being careful to use a soft microfiber cloth and rotate in circular movements.

·        For deposits that are difficult to remove such as mineral deposits you can try scrubbing the surface lightly using a soft brush.

Always ensure that you wash off any cleaner with clean water and then wipe off the glass with a clean piece of material to avoid streaking.

 

3. Prevent Soap Scum Buildup

Soap scum is one of the hard-to-solve issues one can encounter when handling frameless glass shower doors. It is formed when soap scum combining with hard water which leads to formation of a cloudy, dull film on the glass. To prevent this buildup:

 

·        It also important to note that liquid soap should be used rather than bar soap because the latter is likely to leave behind a residue.

·        One of the solutions you can try in order to prevent soap scum in large quantities in your home, is to have a water softening system installed.

·        It is also recommended to clean the glass with warm water and household vinegar, or with water containing one part vinegar to remove soap scum which starts to build up on the glass.

Some of the preventive measures which can be of great benefit as far as retaining the glasses’ surface clarity are concerned are the following; For the homeowners in Oakville region where hard water is prevalent, these measures are of most importance.

 

4. Protective Coatings for Glass

Some frameless glass shower doors have finishes, to help prevent water from penetrating and to minimize spotting as well as soap scum and mineral deposits. Some showers doors do not have a coating, while others may have one that has peeled off and this means that it is important to apply a glass protectant on the shower doors.

 

These coatings create a layer on the surface of the glass that is easy to maintain as compared to the normal surface. Some protectants can be applied directly by the homeowner while others have to be done professionally. In order to maintain this protection, it is suggested to reapply the coating as advised.

 

5. Inspect and Maintain Hardware

Frameless shower doors may have more emphasis on the glass but it also pays to maintain the fixtures. Doors are hinged and are managed by handles and brackets and such components are very important to the shower doors and should always be checked and at times repaired.

 

Here are a few maintenance tips for the hardware:

 

Check for loose screws: Eventually, the screws, which fasten the hinges and handles may rattle off. It is advisable to turn all bent, damaged or loose screws with a screwdriver, to avoid compounding the situation by causing harm to the door or hardware.

Lubricate hinges: Even the hinges should be lubricated using a small silicone-based lubricant if they start to squeak or become stiff.

Clean hardware: Clean metal hardware with a soft cloth together with a cleaner to avoid having rust or developing corrosion especially in the bathroom.

6. Keep Mold and Mildew Away

The melt and mildew are likely to grow in between the gaps of frameless glass shower doors especially on the seals or caulking since most shower areas are humid. To prevent mold and mildew:

·        Maintain adequate lighting, and use a bath exhaust fan and also open the door and/or a window after a shower.

·        Clean the shower doors and the seals and the tracks especially with water after each use.

·        Check the seals and the caulking periodically for any sort of damage, or growth of mold, and replace as and when needed.

Conclusion

Frameless glass shower doors are a great addition to any bathroom but they need some focus to clean and maintain in Oakville. If you squeegee the glass, use proper cleaning agents, and check the hinges, do not worry about your framed shower doors being dirty and misaligned within a few years. No matter if you care about the look of your custom shower doors or about the value of your money, it is important to follow these maintenance recommendations in order to preserve the beauty and longevity of your custom shower doors.