What To Expect During The Concrete Polishing Process?

As polishing your concrete involves using expensive machinery to scrape and smooth the surface, it’s a job best left to flooring professionals. To utilise some of this equipment to assist you obtain a fine, smooth, glossy finish, you would also need to have a fair level of knowledge and experience. The procedure for polishing concrete is really simple. Before polishing the concrete to the required finish, you must first prepare the surface, grind the concrete and apply a sealant.

Preparing The Surface

One of the most important phases in concrete polishing in Melbourne is preparing the concrete floor. Your actions at this point will affect how well the outcomes turn out. Utilising a concrete crack filler or patching compound, seal any exposed holes, cracks and dents. This will assist you in getting clean results and reduce the possibility that those holes will reappear after the polishing procedure is finished.

Grinding The Concrete

The following step involves grinding and honing the concrete to create a flat surface that is prepared for polishing. This phase also has a significant influence on the outcome. To assist you choose the appropriate tools, make sure you have thoroughly evaluated and comprehended the hardness degree of your concrete floor. You may be guaranteed excellent finish quality, speed and efficiency, durability, safety and many other benefits by selecting the appropriate diamond tools for the hardness level of the concrete. It’s important to avoid using the incorrect instruments since they might break while being used, putting the technician at risk.

Applying Densifier

During the process of concrete polishing in Melbourne, a chemical solution known as a densifier is utilised to harden the concrete surface. The densifier is used before the polishing stage but after the first grinding stage. A densifier is used to improve the concrete’s surface hardness, water resistance, durability, smoothness, sheen and aesthetic appeal. A calcium silicate hydrate (CSH) gel is produced when the densifier is applied to the surface because it enters the pores of the concrete and interacts with the calcium hydroxide in the cement.

How you apply the final touches will mostly rely on your style. The team of skilled specialists is devoted to providing you with top-quality concrete polishing services that will convert your concrete floors into gorgeous and lasting surfaces.